Listen From An Auxiliary Device - Nyne NH-3000 Manuel Utilisateur

Masquer les pouces Voir aussi pour NH-3000:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

After the device stays at a radio
frequency for several seconds, the
display panel returns to normal
clock display. To display the current
radio frequency again, press
once.
Store your favorite radio stations
You can store up to ten favorite FM
radio stations.
1
In FM tuner mode, tune to a radio
frequency.
2
Press and hold
The display panel shows "P -",
followed by a fl ashing preset
number.
3
Press
or
to select a preset
number for the radio station.
4
Press
to confi rm and store the
preset radio station.
5
Repeat the steps to store nine
more radio stations.
To select a preset radio station:
In FM tuner mode, press
repeatedly to select a preset
number.
The display panel shows the
selected preset number and the
corresponding radio frequency
briefl y, and then returns to clock
display.
The device tunes to the
corresponding radio station.
Tip:
After the device stays at a preset
radio frequency for several
seconds, the display panel returns
to normal clock display. To display
the current preset number and
radio frequency again, press
once.
14
EN
NYNE NH-3000_User Manual_A5.indb 14
NYNE NH-3000_User Manual_A5.indb 14
or
.

Listen from an auxiliary device

Through this docking speaker, you
can listen to music from any auxiliary
device with a 3.5mm headphone
socket, such as a PC or an MP3 player.
1
Connect the supplied 3.5mm
audio cable.
one end to the AUX IN socket on
the back of the device
the other end to the 3.5mm
headphone socket on an auxiliary
device
2
In power-on mode, press
the top of the device or
the remote control repeatedly to
select the AUX source.
The display panel shows "AU"
briefl y, and then returns to clock
display.
3
Start music play on the auxiliary
device.
on
on
5/30/2012 9:37:10 PM
5/30/2012 9:37:10 PM

Publicité

Table des Matières
loading

Table des Matières