Spare Parts - Facom CR.12H Notice Originale

Precautions Precautions
Never use a FACOM CR.12H jack for a use other than that described in the instructions. Never modify
FACOM CR.12H jacks. Any repairs shall be made by a skilled technician using spare parts supplied by a
FACOM dealer. FACOM CR.12H jacks are devices made for professionals trained in working on vehicles
using lifting means.
- The CR.12H jack is used to lift a vehicle by the wheel.
- Use the CR.12H jack only to move a vehicle with one or several blocked wheels or to help moving the
vehicle in a confi ned space.
- Move a vehicle using a FACOM CR.12H jack only by pushing it gently by hand.
- Never use one or several FACOM CR.12H jacks to tow a vehicle with another or drive it using the vehicle's
engine.
- Use CR.12H jacks only on smooth, clean and fl at fl oors. Do not use FACOM CR.12H jacks on a slope.
- Never work or insert a limb under a vehicle lifted with a FACOM CR.12H jack.
- One or several FACOM CR.12H jacks can be used to move a vehicle.
- Never exceed the 600 Kg maximum capacity of the FACOM CR.12H jacks.
- In case of doubt, do not use a FACOM CR.12H jack.
Use Use
Lifting:
- Check there is no obstacle or person under or near the vehicle.
- Block or apply the vehicle's brakes.
- Open the jack valve and open the two arms of the CR.12H jack. (1)
- Position the FACOM CR.12H jack with both arms on either side of the wheel to lift. (2)
- Close the jack valve. (1)
- Pump the pedal up to the stop. (3)
- Insert the safety pin. (4)
Lowering:
- Check there is no obstacle or person under or near the vehicle.
- Block or apply the vehicle's brakes.
- Remove the safety pin. (4)
- Open the jack valve. (1)
- Clear the FACOM CR.12H jack.
1

Spare parts

Spare parts
CR.12H-4R: Set of CR.12H wheels.
CR.12H-GP: Safety pin.
CR.12H-HY: Hydraulic plant.
CR.12H-BD: CR.12H frame.
NU-12H_0615.indd 3
2 3
6/18/2015 10:19:58 AM
EN
4