Iso KEMPER MaxiFil Mode D'emploi page 83

A forklift or pedestrian stacker (ant) with work basket is necessary for the filter
change.
Switch the MaxiFil off at the device button.
Remove the new filter element (item 1) from the carton and remove the cap
(item 3). Make sure that the sealing ring is not damaged (item 2) in the
process.
Move a member of staff with a forklift or
basket to the height of the MaxiFil.
Remove the old filter element (item 1) from the MaxiFil (item 3) by slightly
lifting it and then pull it out to the front.
Close the inlet opening (item 2) of the filter element (item 1) with the cap of the
new filter element.
KEMPER MaxiFil stationary - operating instructions- EN
- 83 –
Technical modifications and errors expected.
pedestrian stacker (ant) with work