General Settings - VDO AcquaLink Notice D'utilisation

General settings

Menu layout USER CONFIG
Menu description USER CONFIG
Note: the underlined value/command is the default value/command.
Setting
Race timer > Set race timer
Race timer > Actual timer mode
Trip
Description
Timer or chronometer. The time is
counted backwards or forwards
starting from the set value.
State and commands for
timer/chronometer
Reset of the distance for trip through
water
7" TFT display | Operating instruction v. 1.0 | © 2018 Continental Automotive Switzerland AG
Possible values/commands
From 00:00 to 99:59 hh:mm (00:10).
If = 00:00 the chronometer function starts,
otherwise the timer function starts.
Running / Stopped: active or stopped count.
l
Stop: stops count.
l
Restart: restarts count from the initial set
l
value.
Continue: continues the count from the value
l
where it was interrupted.
Yes
l
No
l
57