Limitations Of Liability - B.A. International SuPreme S300 Mode D'emploi

Operating instructions
1
2
7
4
Operating instructions
The light-curing device was developed for use in the polymerization of light-curable dental
materials like universal trays, sealing lacquer and block-out materials. Homogeneous illuminati-
on by 4 UVA fluorescent tubes incorporated into a high-performance aluminium reflector. Three
curing times can be selected: 5 minutes, 10 minutes or continuous operation.
1. GENERAL
1.1 These instructions facilitate the safe and efficient handling of the device. The instructions
form a component part of the light-curing unit and should be kept in an appropriate place
accessible to the personnel in the vicinity of the unit. Before starting all tasks, personnel must
carefully read and understand these instructions. The basic prerequisite for safe working is
compliance with all the safety and handling instructions described herein. Furthermore, the local
accident prevention regulations and general safety conditions for the application of the device
are also applicable.

1.2 Limitations of liability

The manufacturer assumes no liability for damage due to
• non-observance of the operating instructions,
• unintended use,
• employment of untrained personnel,
• technical modifications,
• use of unapproved spare parts. We reserve the right to make technical changes in the frame-
work of improvement and further development.
SuPreme S300
Light-Curing Unit
3
5
6
1 Connection cable (back of the unit)
2 ON/OFF switch
3 Polymerization chamber
4 Drawer
5 Option key curing time
6 Display curing time
7 Nipple