Saey H-60 S Notice D'installation Et D'utilisation page 56

Cleaning the glass
The airwash-system keeps the glass of the appliance clean for a longer period of time. However, blackening of
the window surface cannot be prevented in the long-term. The use of damp or wet wood aggravates this effect.
The window surface can be cleaned as follows:
Place a slightly damp piece of newspaper or rag in the white ashes of the cool appliance and rub this on the
1.
glass. The ashes have a gently scouring effect.
Now rub the window surface with another damp piece of newspaper or rag. Finally polish the glass with a
2.
clean dry soft cloth.
There are also special cleaning products for fireplace glass. Be careful with these products because some may
damage the heat resistant paint of the appliance. Follow the instructions of the cleaning product carefully.
ATTENTION
Never use 'scouring' cleaning products, they can damage the protective layer of the glass and cause it to
crack.
By applying the following tips and tricks you can prevent damage to the glass.
•
Don't let burning logs pass the log grid.
•
When filling wood prevent logs from falling against the glass.
•
Don't put too much pressure on the glass during cleaning.
If the glass breaks, then please consult your dealer.
Cleaning the fan
The fan sucks air into the convection mantle and consequently
dust also enters. To guarantee the fan working properly, dust
should be removed periodically. The fan can be reached as
follows:
1. Carefully remove the fire-bricks on the left and right
2. Remove the baffle plate
3. Carefully remove the remaining fire-bricks and the sealing
on the bottom plate
4. Unscrew the hex screws in the back wall
56