Front Panel - Rami CSS 204 Manuel Utilisateur

FRONT PANEL

INPUTS
SAVE LEVEL MASTER
L R
+ +
B
A
1 - Saving input, Left Right separate levels settings
2 - Switch to select the broadcast signal to be monitored.(
3 - Light corresponding to the monitored input A or B.
4 - Switch enabling ALARM on missing signal.
5 - Light for mode "ALARM" on missing signal.
6 - Lights for missing Left channel and/or Right channel
CSS 204 permanently monitors the signal, and use these lights, when a signal is missing,
whatever the switch 4 configuration. Alarm will only occur if the switch is enabled and the signal
missing.
7 - Alarm mode selector.
8 - Lights for Alarm mode
"L or R" : Alarm when the signal is missing on Left or Right channel.
"L and R" : Alarm only when the signal is missing on both channels at the same time.
9 - Missing signal threshold setting (0 to -37 dBu)
Use of dip switches, on in lower position. Each dip switch as its own dBu value (20-10-2)
Ex: 0dBu threshold:
10 - Alarm delay. Use of dip switches, on in lower position.
Each dip switch as its own time value (30-20-10-5-2-1-1-1 seconds)
The delay will be set according to the allowances for "gaps" during speeches or music,
avoiding unexpected alarms
11 - Volume setting
12 - SD card.
13 - Light corresponding to SD card.
ENGLISH
BLANK DETECTION
THRESHOLD ALARM DELAY
(-dBu) (S)
DETECTION MODE
10 2 20 5 1 1
20 5 30 10 2 1
BLANK
ON L L or R
1 2 3 4 1 2 3 4 5 6 7 8
R L and R
OFF
on on
(-dBu)
Ex -10dBu threshold :
10 2
20 5
1 2 3 4
on
Ex: time delay 45s
- +
PLAY
VOLUME
SD CARD
(-dBu)
10 2
20 5
1 2 3 4
on
(S)
20 5 1 1
30 10 2 1
1 2 3 4 5 6 7 8
on
16
ALARM
CSS 204
ANALOG WATCHDOG WITH BACK UP
RESET Fixed TEST
DELAY Flashing ALARM
(S) OUT CONTROL
10 3
TEST
20 5
-dB
SURVEY PEAKMETER
1 2 3 4
on
-15 -12 -9 -6 -3 O +3
CONTROL
Input A or B).
Ex: -27dBu threshold:
+dB
LEFT
RIGHT
+6 +9 +12 PHONES
(-dBu)
10 2
20 5
1 2 3 4
on
Rami - CSS 204