Error Message Display; Mep-7000 Updates - Pioneer MEP-7000 Mode D'emploi

TROUBLESHOOTING

ERROR MESSAGE DISPLAY

MEP-7000
When is unable to operate properly, an error code is displayed on the display panel. Check the error code displayed against
the following table and take the recommended action to correct the error. If an error code other than any of the error codes listed in the
table below is displayed or if the same error code is displayed even after corrective action has been taken, contact your nearest Pioneer
Service Station or contact the store from which you purchased your player for assistance.
Error Code Error Type
E-6002 AUDIO DSP
DOWNLOAD
ERROR
E-7201 TOC READ
ERROR
E-8301 STOP ERROR
E-8302 PLAYBACK
ERROR
E-8303 BUFFER WRITE
ERROR
E-8304 DECODE ERROR
E-8305 FORMAT ERROR
E-8306 MUSIC FILE NONE
E-9101 LOADING
TIMEOUT

MEP-7000 UPDATES

Software for this unit may be updated to improve operation or functionality. For details consult the following support website:
http://www.prodjnet.com/support/
Media Description
Programs cannot be written to
the audio DPS when the power
is turned on.
DVD/CD TOC data is not being read
from the disc.
DVD/CD Cannot stop disc properly.
DVD/CD Desired address cannot be
searched.
Address cannot be read.
Focus servo cannot be closed.
Pickup cannot be moved.
DVD/CD/USB Failed to write to music data
buffer.
DVD/CD/USB Although the compressed
music file (MP3/AAC) is in the
format supported by this unit,
a data error or decode error
occurred.
DVD/CD/USB Although the extension of the
music file (MP3/AAC/WAV/
AIFF) is correct, the
description within the file is
not in the supported format.
USB Although tracks were entered
in libraries (database)/playlists
etc., at time of playback the
tracks had been deleted from
the USB storage device.
DVD/CD A mechanical error (timeout)
occurred during the loading or
unloading of a disc.
Possible cause and recommended action
Consult your dealer or the nearest Pioneer
Service Station.
• If there are cracks in the disc, replace the
disc.
• If the disc is dirty, clean the disc.
• If the unit operates normally with other discs,
there is a problem with the disc.
Consult your dealer or the nearest Pioneer
Service Station.
• If there are cracks in the disc, replace the
disc.
• If the disc is dirty, clean the disc.
• If the unit operates normally with other discs,
there is a problem with the disc.
Consult your dealer or the nearest Pioneer
Service Station.
Consult your dealer or the nearest Pioneer
Service Station.
Consult your dealer or the nearest Pioneer
Service Station.
Exchange the disc or file to one that meets
format specifications.
Do not delete music files from USB storage
devices.
If a foreign object is in the disc loading slot,
remove the object.
67
En