Cooper Lighting Solutions Metalux CGTSURF22 Instructions D'installation

IB519117N
Installation Instructions – CGTSURF22 and CGTSURF14
Instructions d'installation – CGTSURF22 et CGTSURF14
Instrucciones de instalación – CGTSURF22 y CGTSURF14
Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this product
must be performed by a qualified electrician. This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and operation of the product and hazards involved.
Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or attempting any
maintenance. Disconnect power at fuse or circuit breaker.
Risk of Fire- Minimum 90°C supply conductors.
Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.
Risk of Personal Injury- Due to sharp edges, handle with care.
Failure to comply with these instructions may result in death, serious bodily injury and property damage.
DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind that may
arise from the improper, careless, or negligent installation, handling or use of this product.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
NOTICE: Green ground screw provided in proper location. Do not relocate.
NOTICE: Fixture may become damaged and/or unstable if not installed properly.
Note: Specifications and dimensions subject to change without notice.
ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage on delivery
receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be filed within 15 days
of delivery. All damaged material, complete with original packing must be retained.
This document contains instructions for 3 different types of
installations of this product. Please proceed to the appropriate
section of the document based on the type of installation you
will perform.
Section A – Ceiling Mount
Section B – Wall Mount, Horizontal Orientation
Section C – Suspension
N These instructions refer to Type "A" rails and Type "B"
ote:
rails. Please see Figure 0 below to understand how to
identify each type of rail.
WARNING
Type "A" Rail No
Screw Holes on
the Ends
Figure 0.
Metalux
Type "B" Rail
Has Screw
Holes on the
Ends