Safety And Instruction Decals - Maruyama E23 Manuel Du Propriétaire/De L'utilisateur

6. Never allow children to operate the Edger.
7. Use the Edger only in daylight or good artifical
light.
8. Never operate the Edger without proper guards or
other protective safety devices in place.
9. Do not put hands or feet near or under any rotating
parts. Keep clear at all times. Keep all parts of

Safety and Instruction Decals

Safety decals and instructions are easily visible to the operator and are located near any area of
potential danger. Replace any decal that is damaged or lost.
Lubricate drive-
shaft each 30
hours of use.
ON SHAFT
(Part No.223926)
your body away from the rotating Edger blade and
hot surfaces such as the muffler.
10. Keep firm footing and balance. Do not overreach.
11. Use the right tool for the job. Do not use the
Edger for any job that is not recommended by
Maruyama.
ON SHAFT
(Part No.221501)
ON SHAFT
(Part No.221502)
ON DEBRIS SHIELD
(Part No.221528)
— US-10 —