Selecting The Input Signal (Input Button); Customizing Your Monitor; Navigating The Menu - Sony SDM-P82 Mode D'emploi

Selecting the input signal
(INPUT button)
Press the INPUT button.
The input signal change each time you press this button as
follows.
On-screen Input indicator
message) lights up
(Appears about 5
seconds on the
upper left corner.)
INPUT1: DVI-D INPUT1
INPUT1: HD15 INPUT1
INPUT2: HD15 INPUT2

Customizing Your Monitor

Before making adjustments
Connect the monitor and the computer, and turn them on.
Wait for at least 30 minutes before making adjustments for the
best results.
You can make numerous adjustments to your monitor using the
on-screen menu.

Navigating the menu

1 Display the main menu.
Input signal
configuration
DVI-D input
connector (digital
RGB) for INPUT1
HD15 input
connector (analog
2 Select the menu you want to adjust.
RGB) for INPUT1
HD15 input
connector (analog
RGB) for INPUT2
3 Adjust the menu.
4 Close the menu.
Press the MENU button to display the main menu on your
screen.
MENU
Press the M/m buttons to display the desired menu. Press the
OK button to select the menu item.
,
Press the M/m buttons to make the adjustment, then press the
OK button.
When you press the OK button, the setting is stored, then the
display returns to the previous menu.
,
Press the MENU button once to return to normal viewing. If
no buttons are pressed, the menu closes automatically after
about 45 seconds.
MENU
GB
OK
OK
11