Jacuzzi MOOD S Manuel D'installation page 51

Extra configurations
Reset the use
(public or private)
System "reset"
(reset the sauna characteristics)
These configurations are to be used by the installer and/or an authorized Jacuzzi® service centre.
It is recommended to keep the access code in a safe place and only make the
indicated settings.
Do not change the parameters for other settings.
To change the use from "public" to "private" (or vice versa), select the
the instructions on the display.
The hardware setting (see "Setting the maximum operating time") has priority over the ad-
justment made using the control panel.
This function makes it possible to zero the system memory and reset the characteristics of
use; this can be useful if the panel no longer corresponds to the commands and/or if these
characteristics must be changed (language, country of installation, type of heater, etc.).
20:51
After selecting the symbol, follow the instructions on the display to zero the system
memory and reset the characteristics of use.
51
26
5 3 4
~ 10"
20:51
symbol and follow
9
20:51 20:51