Technical Data; Safety Instructions; English; Ec Declaration Of Conformity - AEG HG 560 D Notice Originale

TECHNICAL DATA

Heat Gun
Production code
Rated input
Air temperature
Level 1
Level 2
Air volume
Level 1
Level 2
Weight according EPTA-Procedure 01/2003
WARNING! Read all safety warnings and all instruc-
tions, including those given in the accompanying brochure.
Failure to follow the warnings and instructions may result in
GB
electric shock, re and/or serious injury. Save all warnings and
instructions for future reference.

SAFETY INSTRUCTIONS

Danger of re if not used properly!
Take care if using the device in the vicinity of combustible
materials. Do not direct the device towards the same place for long
periods.
Do not use the device in rooms with a potentially explosive
atmosphere.
Do not use the device in rooms in which easily ammable material
or gases may be present.
Heat can be conducted to combustible materials that are
concealed.
Do not leave the device unattended while switched on.
Do not use the device outside if it is raining.
Do not touch the hot air nozzle during operation (danger of
burning!).
Never cover or close the hot air nozzle.
Do not point the hot air ow at people.
Do not use the device as a hair dryer.
Allow the device to cool down for a while after use before packing
it away.
Always disconnect the plug from the socket before carrying out
any work on the machine.
Only plug-in when machine is switched o .
Before use check machine, cable, and plug for any damages or
material fatigue. Repairs should only be carried out by authorised
Service Agents.
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
Always disconnect the plug from the socket after use.
This appliance is not intended for use by persons (including
children) with limited physical, sensory or mental capabilities
or insu cient experience and/or knowledge unless they are

English

6
HG 560 D
4410 16 01...
4410 21 01...
... 000001-999999
1500 W
300 °C
560 °C
253 l/ min
420 l/ min
850 g
supervised by a person who is responsible for their safety or have
been instructed by them in the safe use of the appliance. Children
should be supervised in order to ensure that they do not play with
the tool.
SPECIFIED CONDITIONS OF USE
The device is suitable for soldering copper pipes, galvanizing
bodywork parts, welding plastics, thawing out water pipes or
heating metal parts
Do not use this product in any other way as stated for normal use.

EC DECLARATION OF CONFORMITY

We declare under our sole responsibility that the product described
under "Technical Data" ful lls all the relevant regulations and the
directives 2011/65/EU (RoHs), 2004/108/ EC, 2006/42/EC and the
following harmonized standards have been used:
EN 60335-1:2012
EN 60335-2-45:2002 + A1:2008 + A2: 2012
EN 62233:2008
EN 55014-1:2006+A2:2011
EN 55014-2:1997+A2:2008
EN 61000-3-2:2006+A2:2009
EN 61000-3-3:2008
Winnenden, 2014-04-25
Alexander Krug / Managing Director
Authorized to compile the technical le
Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany

MAINS CONNECTION

Connect only to single-phase AC current and only to the system
voltage indicated on the rating plate. It is also possible to connect
to sockets without an earthing contact as the design conforms to
safety class II.
HG 600 V
4410 26 01...
4410 31 01...
... 000001-999999
2000 W
90 - 600 °C
90 - 600 °C
345 l/ min
434 l/ min
900 g