Wahl 8467 SuperTaper Traduction Du Mode D'emploi D'origine page 13

Maintenance
Cleaning and care
Danger! Electric shock due to penetration of
liquid.
f Switch the appliance off and disconnect from
the power supply, before you start with clean-
ing and care.
f Do not immerse the appliance in water!
f Do not allow any liquid to get inside the
appliance.
f Only reconnect the appliance to the power
supply if it is completely dry.
Handle with care! Danger from aggressive
chemicals.
Aggressive chemicals could damage the appli-
ance and accessories.
f Never use solvents or scouring agents.
f Only use cleaning agents and blade set oil
recommended by the manufacturer.
Hygienic spray, blade set oil, and "Blade Ice"
spray are available from your dealer or our service
centre.
Hygienic spray:
Blade set oil (200 ml): Order no. 1854-7935
Blade Ice spray:
f Remove the attachment comb (Fig. 5ⓑ) after every
use. Remove the hair clippings from the blade set with
the cleaning brush.
f If a thorough cleaning is required, the blade
set can be removed. See chapter Changing
the blade set.
f After cleaning the blade set, we recommend using
hygienic spray. It keeps all blade sets hygienically clean
and is effective against bacteria and viruses.
f Oil the blade set with the blade set oil (Fig. 6).
f We recommend that you clean and care for your blade
set during and after clipping with Blade Ice spray. The
Blade Ice spray ensures instant cooling, oiling and
cleaning of the blade set, while also protecting against
corrosion.
f Switch the appliance on briefly (approx. 10 seconds) to
ensure the oil film is evenly distributed.
f For a good and long-lasting cutting perfor-
mance, it is important to oil the blade set
frequently
f If the cutting performance deteriorates after
long use despite regular cleaning and oiling,
the blade set should be replaced.
f Only wipe the appliance with a soft, slightly damp cloth.
Order no. 4005-7051
Order no. 2999-7900
Problem elimination
Blade set is cutting badly.
Blade set is pulling hair out.
Cause: Blade set is dirty.
f Clean and oil the blade set (Fig. 6).
Cause: Blade set is worn out.
f Replace the blade set (Fig. 7/8/9).
Skin injury
Cause: Too much pressure on the skin.
f Less pressure on the skin.
Cause: Cutting angle is too high.
f Hold appliance more flatly to the skin.
Cause: Gap between the front edge of the bottom blade
and the front edge of the top blade is not correctly aligned.
f Align the bottom blade (Fig. 7).
Appliance is not working.
Cause: Defective power supply.
f Make sure that contact between the appliance plug
and the socket is faultless. Check the mains cable for
possible damage.
f Check the power supply.
Disposal
Handle with care! Environmental damage in
the case of incorrect disposal.
f Correct disposal will ensure environmental
protection and prevent any potentially harmful
impact on people or the environment.
Adhere to the relevant legal requirements when disposing
of the appliance.
Information on the disposal of electrical and electronic
appliances in the European Community:
Within the European Community, national regu-
lations are specified for the disposal of electrical
appliances, based on EU Waste Electrical and
Electronic Equipment Directive 2002/96/EC
(WEEE). In accordance with this, the appliance
can no longer be disposed of with the local or
domestic waste.
The appliance will be accepted free of charge by
local collection points or recycling centres.
ENGLISH
de
en
fr
it
es
pt
nl
sv
no
fi
tr
pl
cs
sk
hu
sl
ro
bg
ru
uk
el
ar
13