FLUVO WK Notice D'utilisation page 111

7.3.2 Faults
In case of faults in the operation of the centrifugal pump, that were not caused by the
control facility or other foreign devices, proceed as follows:
1. Locate the site of the fault or defect.
2. Determine the cause.
3. Remedy the fault.
Information:
i
In chapters 8. Fault Assistance there is a table listing the most frequent faults,
their cause and the recommended way to eliminate them.
Pumpe Typ WK / WKN
Version: 27220 - A
OPERATOR´S MANUAL
Schmalenberger GmbH + Co. KG
D-72072 Tübingen / Germany
111