Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Installation options
13.12 Temperature limit / Anti-scalding protection
The maximum temperature can be limited to 43 °C on the pro-
gramming unit of the appliance cover. For this, the following steps
are necessary:
f Remove the appliance cover.
f
f Remove the electronic PCB from the programming unit of the
f
appliance cover. Be careful with the snap-on hooks.
f Move the plug from left to right (position "43 °C").
f
f Refit the programming unit, ensuring the snap-on hooks
f
click into place. Observe the positions of the push-button and
shaft.
CAUTION Burns
If operating the appliance with preheated water, the set
temperature limit and anti-scalding protection may be
ineffective.
f In this case, restrict the temperature at the upstream
f
central thermostatic valve (see chapter "Installation /
Appliance description / Accessories").
www.stiebel-eltron.com
DHB-E SLi |
33
Publicité
Chapitres
Table des Matières
Dépannage
