Electrical Connection; Environment Concerns - Electrolux WS140SL Mode D'emploi

60 WWW.ELECTROLUX.COM
3.
Open the drawer and fix the crockery
warmer to the sides of the unit using the
provided screws.

Electrical Connection

Electrical installation must be performed by an
electrician qualified in accordance with the
legislation in force.
Before connecting the crockery warmer to the
electric mains, check that the voltage and
frequency of the mains matches that which is

ENVIRONMENT CONCERNS

Recycle the materials with the symbol.
Put the packaging in applicable containers to
recycle it.
Help protect the environment and human
health and to recycle waste of electrical and
electronic appliances.
shown on the rating plate located in the
heating block inside.
The electric connection is made via an
omnipolar switch, which is suitable for the
intensity to be tolerated and which has a
minimum gap of 3mm between its contacts,
which will ensure disconnection in case of
emergency or when cleaning the crockery
warmer.
If a plug is used for the electric connection,
then it must be accessible after installation.
The connection
earthing, in compliance with current norms.
WARNING:
The crockery warmer must be earthed.
The manufacturer and retailers do not accept
responsibility for any damage that may be
caused to people, animals or property if these
installation instructions are not observed.
Do not dispose appliances marked
with the symbol with the household
waste. Return the product to your local
recycling facility or contact your municipal
office.
should include correct