Frontal Led; Frontal Selector; Maintenance And Disposal - CARLO GAVAZZI EM24 IS Manuel D'emploi

Frontal LED and selector

Frontal LED

The frontal red LED flashes proportionally to the active imported energy consumption if the selector is in
energy consumption in kvarh

Frontal selector

• Lock position: the frontal selector prevents from accessing the programming mode
• 1, 2, 3 (kvarh ) position: quick access to measuring pages. Each position is associated with one measuring page according to the following table:
Application Selector position
Lock
A
1,2,3 (kvarh
B, C, E, F, G, H
Lock, 1, 2, 3 (kvarh
C
Lock, 1, 2, 3 (kvarh
Lock
1
D
2
3 (kvarh

Maintenance and disposal

Cleaning
Use a slightly dampened cloth to clean the display. Do not use abrasives or solvents.
Responsibility for disposal
The product must be disposed of at the relative recycling centers specified by the government or local public authorities. Correct disposal
and recycling will contribute to the prevention of potentially harmful consequences to the environment and persons.
position. Any kind of negative (exported) energy will not be managed by the front LED.
3
1
)
Can be set from 1 to 31
)
Can be set from 1 to 31
)
31
18
19
20
)
Essential information
- 1 - 2 position, and to the reactive inductive
Page available
EM24 IS - Instruction manual | CARLO GAVAZZI Controls SpA 15