Caution - INFOSEC UPS SYSTEM XP PRO Série Notice D'utilisation

2 CAUTION

The UPS contains voltages that are potentially hazardous. All repairs should be
performed by qualified service personal.
The UPS has its own internal energy source (battery). The output receptacles may be
alive even when the UPS is not connected to an AC supply.
Do not plug laser printer.
The UPS is suitable only to computers and electronic equipment with substantially
rectifier or capacitive loads. It is not suitable to electronic equipment with significant
inductive loads, such as motors & fluorescent lamps.
Be sure to operate within the power rating of the UPS. Below 1/2 or 1/3 of rated
power is recommended for longer backup time & longer battery life.
Do not place the UPS near excessive humidity, under sunshine, or close to heat-emitting
sources.
If the UPS is out of order, please unplug power cord and consult your dealer right away.
Do not remove cover if there is no serviceable part inside.
The unit should be supplied by grounded source. Do not operate the unit without ground
source.
The socket-outlet should be installed near the equipment and be easily accessible.
Do not plug the UPS power cord into itself. That will result in a safety hazard.
Installation should be performed by a qualified technician or electrician in accordance
with local electrical codes.
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - France - www.infosec.fr
Hot Line : tél : +33(0)2 40 76 15 82 - fax : +33 (0)2 40 94 29 51- hotline@infosec.fr - 10 05 04 205 02
- -
2