Preparation; Unpacking; Disposal Of Packaging Materials - SilverCrest SEK 400 D2 Mode D'emploi

CAUTION – PROPERTY DAMAGE!
GB
IE
Do not use an external timer switch or a separate remote control
►
system to operate the appliance.
Never leave the appliance unattended during operation.
►
Never place the appliance near sources of heat.
►
Never open the housing. If you do, it can no longer be assured
►
that the appliance is safe, and the warranty will be invalidated.
Use only the accessories provided with the appliance, and never
►
use the appliance without first inserting the egg tray .
Allow the appliance and accessories to cool completely before
►
cleaning and storing them.

Preparation

Unpacking

Disposal of packaging materials

6
Remove all parts of the appliance and the operating instructions from the
box.
Remove all packaging materials and any adhesive labels from the appliance.
WARNING
Risk of suffocation!
► Packaging material may not be used as a plaything.
Risk of suffocation.
The packaging protects the appliance from damage during transport. The pack-
aging materials have been selected for their environmental friendliness and ease
of disposal, and are therefore recyclable.
Returning the packaging to the material cycle conserves raw materials and reduces
the amount of waste which is generated. Dispose of packaging materials that are
no longer needed in accordance with applicable local regulations.
NOTE
► If possible, keep the original packaging of the appliance for the duration of
the warranty period so that the device can be packed properly for return
shipment in the event of a warranty claim.
SEK 400 D2