D-Link AirPremier N DAP-2690 Guide D'installation page 11

Your Setup is Complete
When you have completed the steps in this Installation Guide and configured
your for your network, your network should look similar to this:
To setup and manage the DAP-2690 from a computer, use one of the following
methods:
1. Connect a straight through Ethernet cable between the access point and
your computer.
2. Connect the access point to a switch or router and use a computer from a
computer that is also connected to that switch or router.
* Maximum Wireless signal rate derived from IEEE 802.11n (draft 2.0) specifications. Actual data throughput will
vary. Network conditions and environmental factors, including volume of network traffic, building materials and
construction, and network overhead lower actual data throughput rate.
Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm)
Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am – 05.30pm)
All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm)
DAP-2690 Install Guide
Technical Support
United Kingdom (Mon-Fri)
(BT 10ppm, other carriers may vary.)
Ireland (Mon-Fri)
€0.05ppm peak, €0.045ppm off peak Times
Internet
http://www.dlink.co.uk
ftp://ftp.dlink.co.uk
11