Geberit AQUACLEAN TUMA COMFORT Instructions De Montage page 31

Testing the anal shower
Prerequisite
– Comfort model: User is simulated.
A shower cycle ends after 50 seconds. If
required, restart the shower cycle.
1
Briefly press the <Shower> button on the
lateral control panel.
ü The device performs prerinsing.
ü The spray arm extends.
ü The anal shower starts in oscillating
function. A small amount of water drains
into the WC ceramic appliance via the
overflow. The anal shower is active for
50 s econds.
54043197390654347-1 © 11-2017
967.304.00.0 (02)
2
Test adjustability of spray intensity.
3
Test shower water temperature.
Result
ü The shower water is noticeably warm.
ü The device performs a shower cycle. Pressing
the <Shower> button again interrupts the
shower cycle.
ü After completing the shower cycle, the spray
arm retracts.
ü The device performs postrinsing.
ü The dryer functionality starts after the shower
procedure (Comfort model).
If the shower water remains cold, the
device is defective. Inform customer
service.
EN
31