Gisowatt ProfiClean PC 20 Instructions D'utilisation Et D'entretien page 16

English
vacuum.
Immediately turn off the appliance and empty the drum container.
C
- HOW TO CLEAN UP LARGE AMOUNTS OF LIQUID
3
- Do not fully immerse the mouth of the crevice tool in order to ensure partial air fl ow
(fi g."7").
D
MAINTENANCE
- Before performing any maintenance operations (even cleaning
or replacing the fi lter systems) always remove the plug from the
power supply.
D
- DUST BAG
1
- The bag must never be reused but should always be
replaced.
- Pull the plastic fl ange out of the dust collector air(fi g."8").
- Pull the paper fi lter bag out (fi g."9").
- Fasten the plastic flange with the corresponding lid
(fi g."10").
D
- FILTER ELEMENT
2
- Remove the fi lter element (b) from the motor support (c) (fi g."6").
- Clean the fi lter element (b) frequently using a soft bristle brush
(fi g."11").
- To clean the fi lter element thoroughly, use a jet of water from the
inside directed outwards (fi g."12").
- When the fi lter element is wet handle it with care (fi g."13").
- Before refi tting the fi lter element, make sure it is perfectly dry.
- Replace if worn.
D
- FOAM FILTER
3
- Wash the mousse fi lter with water and DO NOT use detersives
(fi g."14").
- Replace it if worn or ripped.
16
(Cod. 83 140B0K*)
(Cod. 83 200B0G*)
(Cod. 83 035BHB)
* Pack code