Gisowatt ProfiClean PC 20 Instructions D'utilisation Et D'entretien page 15

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
B
- USE OF THE FILTER ELEMENT
2
(Cod. 83 200B0G*)
- Place the fi lter element (b) onto the motor support (c) (fi g. "3").
- Place the plastic adaptor disk (a) on the fi lter element (b) (fi g."4").
- Use of the fi lter element is particularly recommended for cleaning up very fi ne dust.
It can be used with the paper bag that, besides preventing from clogging, has the
advantage of rapidly and hygienically transferring the vacuumed dirt.
-
Do not use the bag to vacuum sharp or wet materials.
B
- USE OF THE FOAM FILTER
3
- To vacuum liquids, ALWAYS use the foam fi lter (fi g."5").
B
- EXHAUST POST-FILTERS
4
- The post-fi lters ensure that the air blown back into the room is free
from impurities.
C
USE OF THE APPLIANCE
C
- USE AS A DRY CLEANER
1
-
The fi lter element must always be used (fi g."3" and "4").
Keep the fi lter element clean.
Replace it if caked or worn.
- To suck up particularly fi ne dust (cement, talc etc) the fi lter unit must always be used
together with the powder collection bag.
C
- USE AS A WET CLEANER
2
-
Always remove the fi lter element (fi g."6").
Use the foam-fi lter (fi g."5").
- When the vacuumed liquids reach the maximum level in the drum, suction is automatically
stopped by the safety fl oat.
The user is warned by an increase in the rpm rate of the motor and the absence of
* Pack code
(Cod. 83 035BHB)
English
15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Proficlean pc 22

Table des Matières