General Information - WIKA TSD-30 Mode D'emploi

1. General information

1. General information
The temperature switch described in the operating instructions has been designed and manufac-
■
GB
tured using state-of-the-art technology. All components are subject to stringent quality and environ-
mental criteria during production. Our management systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the instrument. Working
■
safely requires that all safety instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and general safety regulations for the
■
instrument's range of use.
The operating instructions are part of the product and must be kept in the immediate vicinity of the
■
instrument and readily accessible to skilled personnel at any time.
Skilled personnel must have carefully read and understood the operating instructions prior to begin-
■
ning any work.
The manufacturer's liability is void in the case of any damage caused by using the product contrary
■
to its intended use, non-compliance with these operating instructions, assignment of insufficiently
qualified skilled personnel or unauthorised modifications to the instrument.
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Further information:
■
- Internet address:
- Relevant data sheet:
- Application consultant:
4
www.wika.de / www.wika.com
TE 67.03
Tel.: (+49) 9372/132-8976
Fax: (+49) 9372/132-8008976
E-mail: support-tronic@wika.de
WIKA operating instructions temperature switch model TSD-30