Environmental Information; Standby Notifications; Features; Accessories Included - Panasonic TX-32C200E Mode D'emploi

Environmental Information

This television is designed to be environment friendly.
To reduce energy consumption, you can follow these
steps:
If you set the Power Save Mode to Eco, the TV will
switch to energy-saving mode. The Power Save
Mode settings can be found in the 'Picture' section
of the Main Menu. Note that some picture settings will
be unavailable to be changed.
If pressed Right button while Eco option is selected
or Left button while Disabled option is selected,
"Screen will be off in 15 seconds." message will be
displayed on the screen. Select Proceed and press
OK to turn the screen off immediately. If you don't
press any button, the screen will be off in 15 seconds.
Press any button on the remote or on the TV to turn
the screen on again.
Note: If the Mode in the Picture menu is set to Dynamic,
Power Save Mode will be set as Disabled and can not be
changed.
When the TV is not in use, please switch off or
disconnect the TV from the mains plug. This will also
reduce energy consumption.

Standby Notifications

1. If the TV does not receive any input signal (e.g.
from an aerial or HDMI source) for 5 minutes, it
will go into standby. When you next switch-on,
the following message will be displayed: "TV
switched to stand-by mode automatically
because there was no signal for a long time."
Press OK to continue.
2. If the TV is on and it isn't being operated for a while
it will go into standby. When you next switch-on,
the following message will be displayed. "TV
switched to stand-by mode automatically
because no operation was made for a long
time." Press OK to continue.

Features

• Remote controlled colour TV
• Fully integrated digital terrestrial/cable TV (DVB-T/C)
• HDMI input to connect other devices with HDMI
socket
• USB input
• OSD menu system
• Scart socket for external devices (such as DVD
Players, PVR, video games, etc.)
• Stereo sound system
• Teletext
• Headphone connection
• Automatic programming system
• Manual tuning
• Automatic power down after up to six hours.
• Sleep timer
• Child lock
• Automatic sound mute when no transmission.
• NTSC playback
• AVL (Automatic Volume Limiting)
• PLL (Frequency Search)
• PC input
• Game Mode (Optional)

Accessories Included

• Remote Control
• Batteries: 2 x AAA
• Instruction Book
• Detachable stand
• Stand mounting screws (M4 x 12)
TV Control Buttons & Operation
1. Up direction
2. Down direction
3. Programme/Volume / AV / Standby-On selection
switch
The Control button allows you to control the Volume/
Programme/ Source and Standby-On functions of
the TV.
To change volume: Increase the volume by pushing
the button up. Decrease the volume by pushing the
button down.
To change channel: Press the middle of the button,
the channel information banner will appear on screen.
Scroll through the stored channels by pushing the
button up or down.
To change source: Press the middle of the button
twice, the source list will appear on screen. Scroll
through the available sources by pushing the button
up or down.
To turn the TV off: Press the middle of the button
down and hold it down for a few seconds, the TV will
turn into standby mode.
English - 6 -