Chillafish QUADie CPQD01BLU Guide D'utilisation page 4

Assembly instructions
For easy assembly, please use the images in appendix as your reference.
Please check that your box contains all parts shown in image A.
A
Assemble the rear wheels and make sure the bolt is secured.
B
Insert the steering axle into the frame tube.
C
Insert the handle bar into the steering axle. Take out the bolt and push
D
the plastic ring over the steering axle. Make sure the three holes are
aligned.
Insert the hexagonal nut into the hexagonal hole.
E
Insert the bolt through the aligned holes and secure the bolt using a
F
screwdriver.
Make sure the snaps on the caps are aligned with the sleeve in the plastic
G
ring. Click the covering cap into the snap holes.
4
EN