Precautions For Use - Sony TDG-BR250 Mode D'emploi

Masquer les pouces Voir aussi pour TDG-BR250:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
Disposal of the 3D Glasses
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European
countries with separate collection systems)
This symbol on the product or on its packaging indicates that
this product shall not be treated as household waste. Instead it
shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused
by inappropriate waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed information about
recycling of this product, please contact your local Civic Office, your household
waste disposal service or the shop where you purchased the product.
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku
Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product
safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,
Germany. For any service or guarantee matters please refer to the addresses
given in separate service or guarantee documents.
Caution
Please read these safety instructions to ensure your personal safety and prevent
property damage.
Warning
Do not put the 3D Glasses in a fire.
Do not disassemble the 3D Glasses.
Do not use, charge, store, or leave the 3D Glasses near a fire, or in places with a
high temperature, e.g., in direct sunlight, or in sun-heated cars.
Use only the supplied USB cable.
Do not charge the 3D Glasses with anything other than a Sony 3D TV.
For details on Sony devices compliant with 3D, refer to the operating instructions
supplied with the device.
Do not allow water or foreign material to enter the 3D Glasses.

Precautions for use

The 3D Glasses are operated by receiving infrared signals from the 3D Sync
Transmitter.
Mis-operation may occur if:
The 3D Glasses do not face the 3D Sync Transmitter
If there are objects blocking the path between the 3D Glasses and the 3D Sync
Transmitter
If there are other infrared communication devices or lighting equipment,
residential heating equipment, etc. nearby, this may affect their performance.

(GB)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tdg-br200

Table des Matières