Technical Specifications - Plusmed pM-AD02 Mode D'emploi

Cleaning / Disinfection
Compressor (Pump)
• DO TAKE CARE to disconnect from the electrical supply before attempting to clean.
• DO TAKE CARE to use a cloth impregnated with a mild detergent solution.
• DO TAKE CARE to follow manufacturer's solution concentrations
• DO TAKE CARE not to exceed manufacturer's recommendations before wiping off
Maintenance
1. Compressor (pump) maintenance operations must be strictly carried out by technician authorized
and trained by the importer.
CPR - Fast Air Release Valve
1. For emergent CPR, please pull the CPR yellow strip outside quickly to reduce the air fast At
first the air under the chest part will be releasing fast and then the air under the head part and
balance part will be releasing.
2. Normally close the CPR cover to reduce the air leakage.
3.When folding air mattress, open the CPR cover to release the air fast
Cover – Clean & Tidy Keeping
1. Cover can avoid bacteria and odor, it is waterproof.
2. Clean & tidy the cover every week even the cover is not dirty.
3. When the cover is dirty, please wash the cover by clean water. Put the cover onto the air mattress
after dry.

Technical Specifications

Mattress Characteristics
Max. User Weight
Yatak Boyutları
Malzeme
Compressor (pump) Characteristics
Cycle Time
Air Output
Pressure Range
Electrical Power Supply
150 kg
200 x 88 x 11,5 cm (inflated)
PVC 3PLY
10 Minutes
4.5-5.5L/min
15-20kPA
AC220 Volt
5