Publicité
H300
Dear Madam, Sir,
Webasto Thermo & Comfort SE wishes you a lot of pleasure when driving
with your newly installed H300 sunroof. Your sunroof is a new generation
quality product from Webasto Thermo & Comfort Benelux. This new
generation sunroof is available in 2 models, ENTRY and COMFORT.
Below you will find all you need to know about this H300 tilting and
sliding sunroof. In order to obtain the maximum enjoyment from the
sunroof, please read these instructions carefully. Wishing you happy
motoring.
SWITCH
The sunroof can be operated by a 3 button switch with self explanatory
symbols. You can either tilt, slide or close the glass panel.
The switch for the ENTRY model comes in black only. The COMFORT
model switch comes in black with a metal accent and LED illuminated
symbols.
OPERATION
Ensure that your vehicle ignition is switched ON.
SLIDE OPEN (Entry version and Comfort version)
By continuously pressing the button
the OPEN direction (fig. A1). The movement of the panel continues as long
as the button is pressed. The panel stops when the button is released
(fig. A2) or the FULL SLIDE OPEN position is reached.
ONE TOUCH SLIDE OPEN (Comfort version only)
By pressing the button
briefly (max. 0.3 seconds) the glass panel
will move automatically towards the FULL SLIDE OPEN position (fig. A3).
The panel stops when any of the buttons are pressed (fig. A4) or when the
FULL SLIDE OPEN position is reached.
TILT (Entry version only)
By continuously pressing the button
the TILT direction (fig. B1). The movement of the panel continues as long
as the button is pressed. The panel stops when the button is released
(fig. B2) or the FULL TILT position is reached.
USER MANUAL
the glass panel will move in
the glass panel will move in
7
Publicité
