Temperature Display - TFA 60.2508 Mode D'emploi

TFA_No. 60.2508 Anleitung 13.04.2010
TIME BLOCK
– Radio controlled alarm clock
4.3 Activate/deactivate Alarm ON/OFF
• Move the ALARM ON/OFF switch to AL.ON (ALARM ON).
• AL appears on the display. The alarm is activated.
• When the set alarm time is reached the wake-up signal sounds.
• Wave hand within 5 inches distance or press the SNOOZE button to activate snooze func-
tion.
• For the duration of the pre-set interval function, the alarm will be interrupted up to four
times.
• If there is no man-made stop, the clock will alarm lasting 1 minute every snooze interval,
four times totally.
• Press any button and the alarm will stop.
• Move the ALARM ON/OFF switch to 'AL.OFF' (ALARM OFF), the alarm function will stop
working permanently.
4.4 Reading of the temperature, month and date, the alarm time and the snooze interval
• Press the SNOOZE button or wave your hand within 5 inches distance in normal mode to
show the temperature, month and date, the alarm time and the snooze interval.
4.5 12/24 hour mode
• In normal mode, press DOWN button to select 12 (PM appears on the display after 12 h) or
24 hour mode.

4.6 Temperature display

• By pressing the UP button the temperature unit can be changed from °C to °F in normal
mode.
5. Brightness
• Move the brightness adjusting switch to change brightness in 3 steps (HIGH-MIDDLE-LOW).
14
12:46 Uhr Seite 8
TIME BLOCK
– Radio controlled alarm clock
6. Reset
• If the unit does not work properly use a pin to press RESET button, then the clock will
return to the initial mode.
7. Clock back-up
• CR2032 button cell is a back-up battery to maintain clock operation in the event of black-
out or other power failure.
• Observe correct polarity. Low batteries should be changed soon to avoid the damage
resulting from a leaking battery. Batteries contain harmful acids. Wear protective glasses
and gloves when handling with leaked batteries.
Attention: Please do not dispose of old electronic devices and empty batteries in household
waste. To protect the environment, take them to your retail store or to appropriate collection
sites according to national or local regulations.
8. Maintenance
• Keep the instrument in a dry place.
• Do not expose the instrument to extreme temperatures, vibration or shock.
• Do not touch the temperature probe. It is very soft and damageable.
• Clean the instrument with a soft damp cloth. Do not use solvents or scouring agents.
• Avoid placing the instrument near interference sources/metal frames such as computer or
TV sets.
• Please reset the instrument and follow the battery installation procedure if the instrument
does not work properly. Change the battery.
9. Intended usage, exclusion of warranty, safety information
• The product is not a toy. Keep it out of reach of children.
• The product is not to be used for medical purpose or for public information, but is deter-
mined for home use only.
15