Scope Of Delivery And Device Overview; Before Fi Rst Use - DS Produkte Z09008 Mode D'emploi

Ceinture de massage vibrante
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Keep a suffi cient distance from heat sources, e.g. hobs or ovens.
Keep the product away from sharp objects. Do not insert any safety pins, fi xing pins
or other pointy objects into the product.
Do not subject the product to extreme temperatures, severe changes in tempera-
ture, direct sunlight or moisture.
Never submerge the product in water or other liquids! Ensure that the product can
not fall in water or get wet.

Scope of delivery and device overview

4
3
1 On/Off button
2 Buckle strap
3 Vibration unit
4 Zipper to open the battery compartment
Before fi rst use
ATTENTION!
Risk of suffocation! Keep the packaging material away from children and animals.
1. Unpack all parts and make sure that the product contents are complete and check
them for any transport damage. If you identify damages to the components, do not
use them (!), instead contact our customer service centre.
2. Insert batteries in the product. You will need two 1.5 volt batteries, type AA. They
are not included in the product contents:
– Open the zipper on the top side of the belt.
– Remove the battery holder. ATTENTION: The battery holder is connected with
the vibration unit via cables. Only pull out the battery holder until you can
change the batteries. Do not forcefully pull the cables as this may cause
damage to the product!
– Insert two 1.5 volt batteries, type AA. When you insert the batteries, make sure the
polarity is correct (+/-).
– Place the battery holder back into the belt and close the belt using the zipper.
11
EN
1
2

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bm026

Table des Matières