System Requirements; Product Setup - D-Link PowerLine HD Day/Night Cloud DCS-6045LKT Guide D'installation

SySTEm rEQUIrEmENTS

• Computer with Microsoft Windows
• PC with 1.3GHz or above and at least 128MB RAM
• Internet Explorer 7, Firefox 12, Safari 6, or Chrome 20 or higher version with Java installed and
enabled
• Existing 10/100 Ethernet-based network

PrODUCT SETUP

winDowS uSer
Step 1:
If you already have a PowerLine adapter on your existing network, continue to step 2. Plug in the
PowerLine adapter to a wall outlet. Connect an Ethernet cable from the PowerLine adapter to your
existing network.
Step 2:
Plug in the camera power cord into the DCS-6045L. Move the power switch to the ON position and
wait for the PWR, PLC, and LNK LED to turn green. If you have an existing PowerLine adapter, you will
need to press and hold the PLC button on the camera for 5 seconds. After the PLC LED on the camera
begins blinking, press the PLC button on your existing Powerline adapter within the next 60 seconds.
Step 3:
Insert the DCS-6045L Driver CD in the CD-ROM drive. If the CD Autorun function does not
automatically start on your computer, go to Start > Run. In the run box type D:\autorun.exe (where D:
represents the drive letter of your CD-ROM drive) and click OK. When the autorun screen appears,
click Set up your Cloud Camera and follow the on-screen instructions.
Step 4:
Click on the Start button to start the wizard, and follow the instructions from the Installation Wizard to
finish setting up your camera.
DCS-6045L
®
8/7/Vista/XP, or Mac with OS X 10.6 or higher
3