Publicité
Liens rapides
Towbar
6083
• Hi-Lux
Montagehandleiding
Fitting instructions
Montageanleitung
Instructions de montage
Monteringsanvisningar
Montagevejledning
Instrucciones de montaje
Istruzioni per il montaggio
Instrukcja montażu
Asennusohjeet
Pokyny k montáži
Szerelési útmutató
Руководство для монтажа
Your perfect fit
brink.eu
Publicité
Manuels Connexes pour Brink 6083
Sommaire des Matières pour Brink 6083
- Page 1 Towbar 6083 • Hi-Lux Montagehandleiding Fitting instructions Montageanleitung Instructions de montage Monteringsanvisningar Montagevejledning Instrucciones de montaje Istruzioni per il montaggio Instrukcja montażu Asennusohjeet Pokyny k montáži Szerelési útmutató Руководство для монтажа Your perfect fit brink.eu...
- Page 2 6083/2 M12x1,25x35 (10.9) 608380 100Nm 6083/3 Ball area 6083/1 M12x50 (10.9) 110Nm 6083/2 Use only with 4-holes ange ball 6083/4 9530109 M12x50 (10.9) 110Nm 9580331 6083/3 M12x1,25x35 (10.9) M16x70 (8.8) 100Nm 270Nm...
- Page 3 Ball area 6083/2 M12x1,25x35 (10.9) 608380 100Nm 6083/3 6083/1 M12x50 (10.9) 95Nm 6083/2 Use only with 4-holes ange ball 6083/4 9530109 M12x50 (10.9) 95Nm 9580331 6083/3 M12x1,25x35 (10.9) M16x70 (8.8) 95Nm 230Nm...
- Page 4 Fitting instructions Make: Peugeot 508 Saloon; 2011-> Type: 5414 Montage an lei ing Fitting instructions Montageanleitung Instructions de montage Monteringsanvisningar Montagevejledning Instrucciones de montaje Istruzioni per il montaggio Instr ukcja montaż u Asennusohjeet Po kyny k montáž i Sz erelési útmutató RU S оводство...
- Page 5 Couplingsclass: F D-Value : euro 17,2 Approved tested E11 55R 0110646 ECE R55 140 kg RAYMOND 10.9 MODIFICATION?
- Page 6 Copy of manufacturersplate...
- Page 7 * Should this installation process entail the cutting of the bumper – conformation MUST be obtained by the installation engineer of the customer’s acceptance prior to completion. Brink Towing Systems B.V. do not accept responsibility for any matters arising as a result of this miscommunication.
- Page 14 Ball area...
- Page 15 Per verificare l’idoneità del dispositivo di traino omologato a norma UN ECE R55, all’installazione sulla vettura su cui si intende procedere al montaggio, compilare la seguente formula (se neces- sario declassare la massa rimorchiabile): DA COMPILARE PER IL COLLAUDO DICHIARAZIONE DI CORRETTO MONTAGGIO: TIMBRO e FIRMA Si dichiara inoltre di aver informato l’utente del veicolo sull’USO e MANUTENZIONE del dispositivo stesso.