Product Description; Designated Use; Restrictions Of Use; Technical Data - erba 33621 Mode D'emploi

GB - INSTRUCTION MANUAL

2. PRODUCT DESCRIPTION

1 – Speed dial
2 – Unlock button
3 - Handle
4 – On/off switch
5 – vaccumcleaner connector
6 – orbital cutting lever
7 – Angle adjust
8 – quickchange tool holder
9 – baseplate with guide

3. DESIGNATED USE

The jigsaw is designed to cut wood, plastic, metal, ceramics and rubber using suitable sawblades.
Any other use is prohbited. The buyer accepts all liabilities, legal and otherwise, for any damage or
injury resulting from improper use of the product (i.e. any other use than the above stated desig-
nated use).
4. RESTRICTIONS
Please note, that this product is not designed for commercial or industrial use. We accept no liability
or warranty claims should the product be used in industrial and/or commercial operations.

5. TECHNICAL DATA

Output:
Rated power:
Orbital cutting settings:
Cutting depth (wood/metal):
No load speed:
Sound pressure level L(pa):
Sound pressure level L(wa):
Vibration on handle:
Protection class/IP:
Weight:

6. NOISE EMISSION VALUES

See technical data.
ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
Page 11
Changes, print, punctuation and other errors reserved!
650 W
230V ~50Hz
0-III
65mm/8mm
0-3.000 U/min-1
84dB(A)±3dB
95dB(A)±3dB
7,71 m/s (±1,5 )
2
II / IP20
3,25kg
Instruction manual
33621
Issue: 12/2016