König Electronic SEC-DVR504 Mode D'emploi page 7

Description of the connectors on the rear panel of the DVR:
1
5 6
1. Network interface RJ45, 10 M / 100 M
2. VGA video output for monitor
3. CVBS video output for monitor
4. BNC input connectors for the connection of cameras
5. DC power input (use only the supplied AC/DC power supply)
6. USB port for mouse
Description of the remote control:
The functions and symbols of the buttons on the remote control are identical to the functions of the
buttons with the same markings on the front panel of the DVR.
The following buttons can only be found on the remote control:
If the password is enabled, press the lock button to log out of the menu after changing settings
such as the password.
Note: the default password for Admin is "888888" and the default password for user1 is "666666".
In the menu > system > user, you can change the password of Admin and add another username and
password.
Numerical buttons: press button 1, 2, 3 or 4 to select the camera channel. Other numerical buttons
have no function for this model.
Press the ENTER button to confirm your choice in the menu.
Press the sequence button to start the automatic sequence between the connected cameras.
Mute button. Not applicable for this model.
Menu/ESC: press this button to enter the menu or exit menu/option
Quad button: press this button to switch to quad mode. Press button 1, 2, 3 or 4 to select the
camera in full screen again.
2 3
4
7