Getting Started; Inserting And Removing Battery; Charge The Camcorder And Remote Control - Toshiba CAMILEO X-SPORTS Mode D'emploi

Getting Started

Inserting and removing battery

Your camcorder comes with a battery that needs to be inserted in the
camcorder before usage.
1. Open the ports cover.
2. Insert the battery into the slot until it locks properly.
3. To remove the battery, push the battery lock outward and gently pull
battery out.
4. Close the ports cover.
(Sample Illustration) Inserting / removing battery

Charge the Camcorder and Remote Control

You must use the AC adapter or USB cable to charge your camcorder or
remote before usage. To charge your camcorder or remote through the AC
Adapter (5V/1A) plug the AC adaptor into an AC wall socket and connect
its micro-USB plug into the micro-USB port on the camcorder / remote.
The blinking green light indicates that the battery is currently being charged;
the light glows continuously green once charging is completed. The full
charging time with AC adapter is approximately 2.5 hours. (Actual charging
time will vary, depending on battery condition and charging conditions.)
To charge your camcorder / remote through the supplied USB cable connect
your camcorder's / remote's micro-USB port to a USB port on your computer
with the supplied USB cable. The blinking green light indicates that the battery
is currently being charged; the light glows continuously green once charging is
completed. Charging the battery through the USB cable takes approximately
6 hours for camcorder / 2.5 hours for remote. (Actual charging time will vary,
depending on battery condition and charging conditions including power
availability from the computer's USB port.)
Never charge the battery by a method other than as instructed. Doing so may
cause a fire or explosion possibly resulting in serious injury.
User's Manual
Battery lock
Battery
CAMILEO X-SPORTS
EN-9