Main Functions Of The Go Key - Novag Perfect Chess 2Robot Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GO key
SET UP key
CLEAR key
KING piece symbol key
ROOK piece symbol key
COLOR key
KING piece symbol key
COLOR key
GO key : to confirm the above setting
GO key: to start the mate search
The Chess Computer will answer with the first halfmove:
1. B4-H4. The Black King can only move G8-F8; please execute this move.
The Chess Computer will make its counter-move with 2. H4-H8. MATE!
Black Level Group (BH7) = Level 127 RANDOM LEVEL SETTING:
On Random Level the computer selects a random time between 1 – 64 seconds inclusive. The
average time will be about 30 seconds per move.
Black Level Group (BH8) = Level 128 REFEREE LEVEL SETTING:
On this level the player can enter moves for Black and White. The computer will not calculate any
moves but will check the legality of all moves entered. This level may be used to enter particular book
openings or to allow 2 players to challenge each other. The display will show "LE rEF". Apart from
being able to enter moves for both sides, the following functions can still be used: TAKE BACK,
CHANGE COLOR, HINT, SET UP, VERIFY, SOUND ON/OFF.
7.

MAIN FUNCTIONS OF THE GO KEY

The GO key is used to enter a command or to exit from a special function. These functions are
explained in their respective paragraphs.
The main functions of the GO key:
To make the Chess Computer calculate for the side to move.
To terminate the move search (only while the Chess Computer is computing) and call-off a
computer move it currently considers the best. Please allow the computer at least
5 seconds of search time before pressing this key so that it has time to compute a reasonable
move.
To let the computer play against itself (according to the set playing level).
To exit from the SET UP mode.
To exit from the VERIFY mode.
To exit from the LEVEL mode.
To start the SOLVE MATE search.
set the display to "Set – – with the white bar"
press square F6
press square B4
set the display to "Set – – with the black bar"
press square G8
it is White to move
12

Publicité

Table des Matières
loading

Table des Matières