Device Overview; Before Initial Use; Attaching / Detaching The Cleaning Attachment - Cleanmaxx SMY-02664 Mode D'emploi

EN

Device Overview

11
10
9
8
7
6

Before Initial Use

1. Remove all packaging materials and any labels that may be on the device and are
used for protection during transportation or for advertising. Never remove the rating
plate and any possible warnings!
2. Attach the cleaning attachment to the motor unit (see "Attaching / Detaching the
Cleaning Attachment").
3. Charge up the battery (see the "Charging Up the Battery" chapter).

Attaching / Detaching the Cleaning Attachment

• Attaching: Insert the cleaning attachment (4) into the front of the motor unit (8) and
press both parts together. When you do this, make sure that the locking lugs of the
cleaning attachment sit in the corresponding recesses of the motor unit.
02664_DE-EN-FR-NL_A5_V3.indb 18 02664_DE-EN-FR-NL_A5_V3.indb 18
18
• Detaching: Place down the device with the cleaning at-
tachment on a stable surface and fi x it with one hand. Le-
ver the motor unit out of the cleaning attachment.
1 Connecting socket
1
for the barrel con-
nector of the mains
adapter
2 Water tank with fi lter
plug
2
3 Ventilation slots
4 Cleaning attachment
5 Hook-and-loop sur-
3
face (on the bottom)
6 Suction openings (in
the scraper lip)
4
7 Scraper lip
8 Motor unit
5
9 Control lamp
10 On / Off switch
11 Handle
22.07.2019 14:22:35 22.07.2019 14:22:35