Getting Started - Geneva Cinema Mode D'emploi

gEtting startEd

aBout thE ModEl cinEMa
The Model Cinema supports the following audio sources:
• TV ( analog, coaxial, optical inputs )
• Bluetooth
• External devices ( analog audio input )
The Model Cinema has the following functions:
• Automatic selection of the three different TV audio inputs
• Automatic Power - On
• Automatic Power - Off
• Display dims itself automatically if the remote control is not used
The following audio features will enhance your listening experience:
• Automatic adaption of the audio volume using the
Total Volume™ technology
• Voice Enhancement to better understand conversations
• Very wide stereo reproduction
gEtting startEd
i connect power to the Model cinema
On the rear side, connect the AC power cord to the AC power input (1)
and then to the wall outlet (2).
ii connect the tv to the Model cinema
Place the TV on the top of the Model Cinema. Then connect the TV audio
output (3) (optical, coaxial or analog audio) to the Model Cinema (4).
For more details, see the chapter "TV Setup".
2
iii turn the tv on
Use the remote control to power on your TV. The Model Cinema will
now automatically turn itself on. Moreover, it will automatically select
the correct audio input connector.