Product Description And Specifications; Intended Use; Delivery Scope; Product Features - Bosch AXT 22 D Notice Originale

OBJ_BUCH-895-003.book Page 13 Monday, April 11, 2011 1:52 PM
Do not attempt to repair the machine un-
less you are qualified to do so.
Do not allow processed material to build
up in the discharge zone; this may prevent
proper discharge which can result in kick-
back of material through the chute assem-
bly.
If the machine becomes clogged, switch
off and allow the cutter to stop. Remove
the plug from the mains supply before
clearing debris.
Check if guards and protective devices are
undamaged and properly mounted. Before
using, carry out possibly necessary mainte-
nance and repairs.
Do not tamper with the motor speed con-
trol settings. Contact a Bosch approved
service agent if a problem exists.
Keep the motor cooling vents clean of de-
bris and other accumulations to prevent
damage to the motor or possible fire.
Never pick up or carry the machine while
the motor is running.
Switch off, allow the cutter to stop and re-
move the plug from the mains supply
whenever you leave the work area.
Do not tilt the machine while it is running.
Do not expose the machine to rain. Only
store the machine in a dry place.
Maintenance and Storage
When the machine is stopped for servicing,
inspection, or storage, or to change an ac-
cessory, switch off and remove the plug
from the mains supply and allow the ma-
chine to cool. Make sure that all moving
parts have come to a complete stop before
making any inspections, adjustments, etc.
Maintain the machine with care and keep it
clean.
Examine the machine and replace worn or
damaged parts for safety.
Ensure replacement parts fitted are Bosch
approved.
If an extension cord is used it shall not be
of lighter grade than the supply cord al-
ready fitted to the machine.
Check the supply and any extension cord
regularly for damage or signs of ageing. Do
not use the machine, if the cords are dam-
aged.
When servicing the cutter be aware that,
even though the motor will not start due to
the interlock feature of the guard, the cut-
ter can still be moved if the motor is turned
by hand.
Never attempt to override the interlock
feature of the guard.
Bosch Power Tools
Product Description and
Specifications
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.

Intended Use

The product is intended for cutting of fibrous
and woody garden waste for composting.
The collection box is intended for collecting
the material cut, and for storing the chute as-
sembly and prodder.
The collection box should not be used for oth-
er purposes.

Delivery Scope

Carefully remove the garden product from its
packaging and check if the following parts are
complete:
– Quiet-shredder
– Chute assembly
– Prodder
– Collection box
– Operating instructions
When parts are missing or damaged, please
contact your dealer.
When fully assembled the garden product
weighs approximately 30.5–31.3 kg. If neces-
sary, obtain assistance to remove from pack-
aging.

Product Features

The numbering of the garden product fea-
tures refers to the illustration of the garden
product on the graphics page.
1 Undercarriage
2 Power plug**
3 Ventilation slots
4 Green button
5 Red "stop" button
6 Yellow button
7 Prodder
8 Chute assembly
9 Clamping knob
10 Adjustment knob
11 Collection box
12 Serial number
13 Blade cover plate
14 LED indicator (AXT 23 TC/25 TC only)
15 Pressure plate
16 Cutting roller
17 Allen key*
** country specific
*Accessories shown or described are not part of
the standard delivery scope of the product. A com-
plete overview of accessories can be found in our
accessories program.
F 016 L70 735 | (11.4.11)

English | 13