Information On The Internet; Technical Data; Type Label - Burkert 6027 Instructions De Service

General Hazardous Situations.
To prevent injuries:
• Ensure that the system cannot be activated unintentionally.
• Installation and maintenance work may only be carried
out by authorized technicians with the appropriate tools.
• After an interruption in the power supply, ensure that the
process is restarted in a defined or controlled manner.
• The device may be installed and operated only when in
a perfect condition and in consideration of the operat-
ing instructions for the valve and furnace.
• The general rules of technology must be observed for
application planning and operation of the device.
Failure to observe this operating manual and its
operating instructions as well as unauthorized tam-
pering with the device release us from any liability
and also invalidate the warranty covering the device
and accessories!
english
8
6.

Technical daTa

The following values are indicated on the type label:
• Ambient and medium temperature, voltage
(tolerance ±10%), kind of current, pressure
Use as return flow valve: In combination with a feed flow valve in
1)
an electric series connection, the voltage value of the type label
is half that of the relevant power supply.
Materials
Housing Brass or stainless steel
Seat seal PTFE
Housing seal FKM
Coil jacket Epoxy or polyamide
Media Heating oils DIN 51603 Part 1-6 at a viscosity:
for an output of ≤ 12 watt: 1.2 to 22 cST
for an output > 12 watt: 1.6 to 76 cST
(other media by arrangement with the Bürkert
sales office).
Operating principle 2/2-way valve
A (NC)
Protection class IP65 in accordance with EN 60529 with
authorized device socket in accordance
with DIN 175301-803
english
10
1)
2(A)
1(P)
5. general infOrmaTiOn
5.1. contact address
germany
Bürkert Fluid Control Systems
Sales Center
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. : +49 (0) 7940 - 10 91 111
Fax: +49 (0) 7940 - 10 91 448
E-mail: info@de.burkert.com
international
Contact addresses can be found on the final pages of the
printed operating instructions.
And also on the internet at: www.burkert.com
5.2. Warranty
The warranty is only valid if the device is used as intended in
accordance with the specified application conditions.

5.3. information on the internet

The operating instructions and data sheets for Type 6027 can
be found on the Internet at: www.burkert.com

6.1. Type label

6.1.1. standard type label
Housing material
Seal material
Orifice
Operating principle
Type
6027 NC 3,0 EF MS
G1/8 PN0-30 bar IP65
110-120V 50Hz 20W
00YYYYYY
00XXXXXX
Identification number
Customer article number (optional)
Voltage, Frequency, Output
Connecting thread, Nominal
pressure, Protection class
Fig. 1: Location and description of the type label
Type 6027
english
9 9
W14LP
english
11 11