Auto Mode - Duux Beam Ultrasonic Manuel D'utilisation

Display icons
Power
When the indicator on, the device is switched on. If
it blinks, the device is in stand-by mode
Water replacement
indicator
When the indicator flashes red, it indicates that
there is water shortage. Please remove the top
cover and add water.

Auto mode

When this indicator light is on, it means the
humidifier is operating in AUTO mode.
Mist output level bars
The amount of bars determine the mist output
intensity set in manual operation mode. There are
three mist output levels: LOW ,
MEDIUM , HIGH
12
WIFI indicator
When the indicator light blinks, it means it's idle
and looking for a device to pair. If it's solid, it
means the device is connected. Press and hold
the button for 5 seconds to cancel the pairing
operation.
Timer indicator
When the indicator lights up, it means you have
entered the timer mode. Below you will see the
number (1, 2, 4 or 8H) of hours on which the timer
is activated.
Display brightness
The display will automatically dim after the last
touch or press.
Water shortage
If there is no water remaining in the water tank, a
beep will sound 3 times, and the water shortage
icon will automatically return to the standby state
after flashing 50 times.
Aroma tray/sponge
Below the top cover you will find a small handle
which hides the aroma tray. Lift the handle
to release the tray and pour a few drops of
aromatherapy on the sponge. Place back the
aroma tray and top cover to continue the
operation.
Note: Only use aromatherapy that is
suitable for ultrasonic humidifiers. Other types of
aromatherapy may damage the device.
Control panel / remote control
The control panel is integrated in the remote
control. When not in use, we recommend placing
the remote control back in the holder on the
device. Remote control batteries are included
(type: AAA). Please note the polarity when inserting
the batteries.
13