Sony MDR-RF430RK Mode D'emploi page 8

Continued
c To connect to TV etc.
If noise occurs when the transmitter is
connected to your TV or VCR, set the
NOISE FILTER switch to ON.
Transmitter
Right channel
(red)
Connecting cord
(supplied)
to stereo mini jack
Notes
• If you connect the transmitter to LINE OUT or
REC OUT jack of an audio reproducer such as an
MD player or CD player, do not set the NOISE
FILTER switch to ON. Otherwise, the volume will
be limited.
• The NOISE FILTER switch effects the sound only
in cases such as connection diagram c. In
diagrams a and b on page 7, the switch has no
effect.
• When the transmitter is placed on or near a TV, it
may pick up a noise.
In such case, place the transmitter away from the
TV.
8
to AUDIO IN
A jack
Left channel
(white)
TV, etc.
2
Connect the transmitter to an AC outlet
using the supplied AC power adaptor.
Notes
• Use only the supplied AC power adaptor. Do not use
any other AC power adaptor.
Polarity of the plug
• When you connect the connecting cord directly to an
earphone jack, the audio signal will not be output
through the right channel. In such a case, use the
separately sold PC-236HG plug adaptor.
• If the connected equipment has the AVLS (Automatic
Volume Limiter System) function, be sure to turn the
function off when using the transmitter. Otherwise,
you will have to turn up the volume of the
headphones, and that may cause noise.
* WALKMAN is a registered trademark of Sony
Corporation.