Operation Introduction - Predator S40 Mode D'emploi

6. Operation Introduction

Before starting operations in this section:
1. Find a place where there is power supply nearby.
2. As shown in Fig.5 and Fig.5a, install the exhaust hose, and adjust the window position well.
Fig. 5 Fig. 5a
3. As shown in Fig. 6, connect drain hose well (only for using heating model);
4. Insert the power cord into an grounded AC220~240V/50Hz socket;
5. Press the POWER button to turn on the air-conditioner.
Fig. 6
43