Texas Power Split 600 V Manuel D'instruction page 15

Special warning when using this log splitter
Using this powerful tool may create special hazards.
Take particular care to safeguard yourself and those around you.
Hydraulic systems. Never operate this tool if there is a hazard presented by hydraulic
fluid. Before using the log splitter, check for hydraulic leaks. Be sure that the tool and your
work area is clean and free of oil spills. Hydraulic fluid can create hazards causing you to
slip and fall, your hands to slip while using the machine or cause a fire hazard.
Electrical safety. Never operate this tool if there is an electrical hazard. Never operate a
log splitter in wet conditions. Never operate this tool with an improper electric cord or
extension cord. Never operate this tool unless you are able to plug it into a properly
grounded outlet which supplies power as stated on the type tag and is protected by a 16
Amp circuit switch if you have a machine with a 230 Volt motor and 10 Amp if you have a
machine with a 380 Volt motor.
Physical hazards. Log splitting creates special physical hazards. Never operate this tool
unless you are wearing proper safety gloves, hard-toed shoes and approved eye
protection etc. Watch out for splitters in order to avoid puncture, injury and jamming the
tool. Never try to split logs which are too large or small to fit properly within the tool. Never
attempt to split logs containing nails, wires or other debris. Clean up as you work,
accumulated split wood and wood chips can create a hazardous work environment. Never
continue to work in a cluttered work area which may make you slip, trap or fall. Keep
onlookers away from the tool and never allow unauthorized persons to operate this tool.
Warning: Never remove a log trapped in the wedge with your
hands.
Warning : Before carrying out any maintenance operation as
described in this manual, disconnect the plug from the
machine.
Voltage as indicated on the rating plate.
15