Télécharger Imprimer la page

emerio PH-117295.1 Mode D'emploi page 7

Publicité

Les langues disponibles

Les langues disponibles

1. Power setting
Press button "
" to choose your desired power setting: the display of "
(750W); the display of "
2. Temperature setting
Press button "
" or "
you set your desired temperature, it will flash a few seconds, and then shows in the display.
3. Time setting
Press button "
seconds, and then shows the set temperature again. The appliance will shut itself off automatically when the
time is up.
4. Child lock
Long press the child lock button until a beep sound is heard, the child lock function is activated.
Long press the child lock button again until a beep sound is heard, the child lock function is cancelled.
5. Turn off
Press button "
" again to turn off the appliance. Then, turn off the main power switch and unplug the
appliance.
SAFETY SYSTEM
The appliance has a safety system which automatically switches off the unit when overheated.
If overheating occurs, switch off the appliance, remove the plug from the socket, and let it cool down for
at least 30 minutes. Put the plug in the socket and switch on the heater.
CLEANING THE HEATER
Always un-plug the heater from the wall socket and allow it to cool down completely before cleaning. Clean the
outside of the heater by wiping with a damp cloth and with a dry cloth. Do not use any detergents or abrasives
and do not allow any water to penetrate the heater.
STORING THE HEATER
When the heater is not used for a long time it should be protected from dust and stored in a clean dry place.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50-60 Hz
Power consumption: 1500W
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred
during production or transportation, please return the device to your dealer. In addition to statutory legal
rights, the purchaser has an option to claim under the terms of the following guarantee:
For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a
defective product, you can directly go back to the point of purchase.
" is on behalf of high heat (1500W).
" to set the desired temperature. You can choose from 16℃ to 40℃. When
" to set the desired working time from 0h to 24h. The set working time will flash a few
- 6 -
" is on behalf of low heat

Publicité

loading