Hkoenig GSX12 Manuel D'utilisation page 7

1. Place the Juice bowl (1) on top of the main body, make sure the juice bowl in position so it
locks into the main body and cannot be removed.
2. Put the strainer holder (2) into the juice bowl
3. Put the strainer (3) into the strainer holder.
4. Put the Juice Auger (4) into the strainer
5. Fit the Hopper (5) over the Juice bowl and turn in position so it locks into the main body.
6. Place the pulp tank (6) so it fits in position on the left hand side of the juicer's main body.
Place the juice cup （7） under the Juicer spout.
7.
8. Slide the food pusher (8) down the food chute. The pusher can only fit one way.
IMPORTANT: If the Juice bowl and lid are not correctly assembled, the Juicer will not operate.
This is a safety feature. Please press the "R" button lightly to stop the Juicer, and over press
will damaged the motor of Juicer.
Product prohibits idling condition before feeding fruits and vegetables.
USING YOUR JUICER
This Slow Juicer is suitable for celery, spinach, carrots, apples, bananas, tomatoes, cucumbers,
balsam pear, all need the juice of fruits and vegetables, but not for the fruits and vegetables
which containing starch and please do not use this Juicer to squeeze sugarcane. Compared with
the traditional juicer, the Slow Juicer slowly grinding process designed utmost improves the
vegetable and fruit juice of the crush rate.
1. Clean fruit and vegetables thoroughly, ready for juicing.
2. If juicing fruit with stones or hard seeds, pit the fruit. Remove any hard inedible skins, i.e. skin
of melons, pineapples and mangoes prior to juicing. If citrus fruits are being used, remove the
skin prior to juicing.
3. If pieces of fruit or vegetables are very large, chop them to a size that will fit down the
juicer's food chute.
4. Ensure the safety clamps are locked in position on top of the juicer lid.
5. Turn the control switch To On to juice fruits
6. Press the food pusher slowly down until all fruit or vegetables have gone through the juicer.
Do not press the food pusher rapidly as the juicer will not be as effective.
7. CAUTION: do not put your hand or any other object in the food chute during operation.
8. The juice from the fruit and/or vegetables will flow directly into the juice cup and the pulp will
be collected in the pulp bin.
9. When juicing is complete, ensure that the juicer's control switch is set to the OFF position,
the power is turned off at the outlet and the juicer is unplugged. It is now safe to disassemble
the unit.
10. If the Juice Bowl is stuck and does not detach from the base, Press reverse button "R" 3-5
seconds. Repeat process 2-3 times. Then, push bowl upward while turning
11. The strainer equipped with auto-cleaning brush
10. Disassemble your juicer in the following order:
a. Remove the food pusher.
b. Remove the lid.
c. Remove the juice Auger
d. Remove the strainer holder & strainer.
e. Remove the juice bowl