Samsung HT-J5500 Mode D'emploi page 33

Creating a Music Playlist
If you are playing music from a commercial CD
1.
or DVD, press the 5 or
Music List Screen appears. If you are creating
a playlist from music on a user created disk or
USB device, access the Music list as described
on page 28 or 29.
2. Press the ▲▼◄► buttons to move to a desired
file, and then press the
to select it. Repeat this procedure to select
additional files.
3. If you want to select all files, press the
button, use the ▲▼ buttons to select Select All,
and then press E . If you want to deselect all
files, press the
TOOLS
All, and then press E .
MUSIC
TRACK 001
✓
TRACK 001
05:57
TRACK 003
04:07
TRACK 005
03:17
TRACK 007
03:47
TRACK 009
03:53
CD a Change Device
c Select
4. To remove a file from the Playlist, move to the
file, and then press the
5. Press the E button to play the selected files.
The Playlist screen appears.
To go to the Music List, press the 5 or
6.
button.
RETURN
To go back to the Playlist, press the E button.
7.
You can create a playlist with up to 99 tracks on
✎
Audio CDs (CD-DA).
If you go to the Music List from the Playlist, and
✎
then return to the Playlist, the Playlist will start
playing again from the beginning.
RETURN button. The
button
YELLOW (C)
TOOLS
button, select Deselect
1 file selected 1/2 Page
TRACK 002
04:27
TRACK 004
03:41
TRACK 006
03:35
TRACK 008
03:49
TRACK 010
03:45
Tools () Jump to Page ' Return
button.
YELLOW (C)
33
- English
Ripping
Insert a USB device into the USB jack on the
1.
front of the product.
With the Playback screen displayed, use the ▲▼
2.
buttons to select a track, and then press the
button. A check appears to the left
YELLOW (C)
of the track.
Repeat Step 2 to select and check additional
3.
tracks.
To remove a track from the list, move to the
4.
track, and then press the
again. The check on the track is removed.
When done, press the
5.
The Tools menu appears.
Use the ▲▼ buttons to select Rip, and then
6.
press the E button. The Rip screen appears.
Use the ▲▼ buttons to select the device to
7.
store the ripped files on, and then press the E
button.
Do not disconnect the device while ripping is in
✎
progress.
If you want to cancel ripping, press the E
8.
button, and then select Yes. Select No to
continue ripping.
9. When ripping is complete, the "Ripping
completed." message appears.
10. Press the E button to go back to the Playback
screen.
This function is not available for DTS Audio CDs.
✎
This function may not be supported by some
✎
discs.
Ripping encodes music in the .mp3 format at
✎
192kbps.
On the Track list screen, you can choose Select
✎
All or Deselect All.
- Use Select All to select all tracks, and then
press the E button. This cancells your
individual track selections.
- Use Deselect All to deselect all selected tracks
at once.
YELLOW (C) button
button.
TOOLS