Samsung HT-J5500 Mode D'emploi page 24

Settings
Network Settings
Select your network type.
Network Type Wireless
Wireless network
✓ ✓
si-ap
MIC
KIMING_VTOWER
WPS(PBC) Search
Select the desired network, and then press the
2.
E button.
On the Security Key screen, enter your
3.
network's security code or pass phrase.
Enter numbers directly using the number buttons
on your remote control. Enter letters by selecting
a letter with ▲▼◄► buttons, and then pressing
E button.
4. When finished, select Done, and then press the
E button. The product verifies the network
connection and then connects to the network.
You should be able to find the security code or
✎
pass phrase on one of the set up screens you
used to set up your router or modem.
Wireless - Manual
❑
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
Follow the Steps 1 to 3 in "Configuring Your Network
Connection". (See page 22)
In the Network Settings screen, change
1.
Network Type to Wireless. The product
searches for and then displays a list of the
available networks.
2. Scroll through the list, select the desired network
or Add Network, and then press the E button.
3. If you selected a network in Step 2, go to Step 6.
If you selected Add Network, go to Step 4.
You can connect your BD
Home Theater to the
internet. Please select which
wireless network to use.
m Move " Select ' Return
24
- English
4. Enter your wireless network or wireless router's
name.
~ Enter numbers directly using the number
buttons on your remote control.
~ Enter letters by selecting a letter with the
▲▼◄► buttons, and then pressing the E
button.
~ To display capital letters (or redisplay lower
case letters if capital letters are displayed),
select , and then press the E button.
~ To display symbols and punctuation, select
123#&, and then press the E button. To
redisplay letters, select 123#&, and then press
the E button.
When finished, select Done, and then press the
E button.
On the Security method screen that appears,
5.
use the ▲▼ buttons to select the network's
Security method, and then press the E button.
On the next screen, enter your network's
security code or pass phrase.
~ Enter numbers directly using the number
buttons on your remote control.
~ Enter letters by selecting a letter with the
▲▼◄► buttons, and then pressing the E
button.
When finished, select Done, and then press
the E button. The product searches for the
network.
The Network connection fail screen appears.
6.
Use ◄► buttons to select IP Settings, and
then press the E button.
7. Select the IP setting field, and then set it to
Enter manually.
8. Select a network parameter to enter (IP
Address, for example), and then press E
button. Use the number keypad on your remote
control to enter the numbers for the parameter.
You can also enter numbers using the ▲▼
buttons. Use the ◄► buttons on the remote
control to move from entry field to entry field
within a parameter. When done with one value,
press the E button.
9. Press the ▲ or ▼ button to move to another
parameter, and then enter the numbers for that
parameter following the instructions in Step 8.
10. Repeat Steps 8 and 9 until you have filled in all
parameters.